There are many brands in the market, each family has its own consumer groups. It is recommended that consumers can compare more, and we suggest that we should objectively compare the following brands in the market. Each family has its own consumer groups and recommends consumption. Can compare more, and we suggest that we should objectively compare the following points
(1) Is there an international certification? Does the manufacturer give a certification report instead of talking to themselves?
(2) Which type of certification is the certification? Is the certification of each manufacturer's certification related to insulation? It is not the certification report that is generally related to the loss of insulation or ROHS.
(3) Is there any well-known large factory to use? If there are many well-known large factories, at least the purchase and testing of large factories can help us make choices and ensure quality.
(4) Is there any guarantee that the cooling material does not reach the temperature difference without charging? If you can get it! Insulation coatings ensure that cooling is taken for granted, and not some manufacturers in the market use it to ensure that they do not fall off to deceive consumers.
In Europe and the United States, the effect of the thermal conductivity coating is evaluated by looking at the reflectance and reflectance coefficients. The higher the reflectivity and reflectance coefficient, the higher the ratio of reflected solar radiant heat, that is, the better the effect! In Europe and the United States, the effect of the thermal conductivity coating is evaluated by looking at the reflectance and reflectance coefficients. The higher the reflectivity and reflectance coefficient, the higher the ratio of reflected solar radiant heat, that is, the better the effect!
The ordinary white paint on the market has a basic reflectivity. The reflectivity SR will probably fall between 0.71 and 0.72, and the reflectance coefficient SRI is between 98 and 99. This is also the case for some companies. Pretend to be the way of reflectivity SR playing word games with this reflectivity coefficient SRI
NASA-grade HeatAX nano-coatings reflect solar radiant heat sources and reduce the conduction and transmission of thermal energy to achieve thermal insulation. The main function is to reflect sunlight, and the overall energy distribution of sunlight includes: 9% ultraviolet light / 40% visible light / 51% near-infrared light. In order to effectively reflect sunlight, it is necessary for the reflection of visible light and near-infrared light. A relatively high reflectance is required to prevent the heat source from scattering into the room. NASA-grade HeatAX nano-coating is exclusively introduced into the "Ninano ultra-insulation-resistant" technology, and has a thermal reflectivity of SR of 0.88 and an SRI thermal reflectivity of 111.46, which is the top performance. First place in the US INTERTEK certification.
NASA-grade HeatAX nano-coatings have excellent performance and are notarized by the notary. The temperature difference is amazing. Any temperature difference experiment must first explain the environment, for example: the temperature of the atmosphere is several degrees? (The higher the temperature, the greater the temperature difference, the longer the sunshine)? Is there any ventilation? Is there anything that is exposed to the sun? Is there any ventilation? etc. These are all factors that will affect the performance of the temperature difference. Our NASA-grade HeatAX nano-coating is the only one that will set the environment without being confused. For this additional explanation:
there is a coating called NASA grade HeatAX nano coating called A, no coating called B
In the atmospheric temperature of 35 ° C or more, the two buildings A and B are not ventilated (no window), no self-heating body, no sun drying, the same geographical position, starting from 8 am, every other one Hours, measuring the temperature of the same point in the two rooms A and B until 5 pm, the average indoor temperature difference, NASA-level HeatAX nano paint can reach 13 degrees C, (this is the Chinese CMA test report method). In Taiwan, if the original factory is connected with materials, the warranty conditions are as long as the atmospheric temperature is above 33 °C, the direct sunlight of the warranty building or the load body is more than 30 minutes, and the surface temperature of the coating is required. Up to 15 degrees C and maintained for more than three years. In the summer, 35 degrees C is the standard; NASA-grade HeatAX nano-coating can reduce the surface temperature of the building by more than 15 degrees (guaranteed by the contract of the continuous material), and then the indoor temperature is reduced by 7 degrees to 10 degrees, and the room temperature is lowered. 1 degree saves 6% of air conditioning.
Enterprises can recover the price difference of air-conditioning electricity from 2 months to 9 months (as of June 2017, the accumulated experience of the listed customer group). The longer the air conditioner is used, the larger the area, the faster the recovery time.
Of course, DIYNASA-grade HeatAX nano-coatings are not troublesome at all. The use is exactly the same as general paint. We don't need special tools and techniques. In North America, our distributors specialize in DIY.
If the facade is painted, it will still be recommended to the professional master. After all, this is a safety consideration. If you just build your own roof, DIY is not difficult at all.
Detailed instructions for the construction will be provided when you receive the goods. General paint rollers, brushes or spray guns can be used.
Our insulation paint products have passed the inspection of Taiwan SGS, Singapore National Green Building Mark, Intertek, China Central CMA, Taiwan TAF Laboratory. The tightness of this product is very good. Generally, the spray paint and oil paint of the wave board can be directly The coating does not fall off. Even the extremely high density glass can be directly applied. Generally, the tiles, cement, bricks, wood, metal, tiles, etc. are no problem. The materials can be directly coated without first applying primer. It is not available to the average Taiwanese industry. Just because NASA grade HeatAX nano paint is a real nano material.
Conventional insulation materials such as glass fiber, polystyrene foam, ore asbestos, etc., are slowed down by the thickness of the material to absorb the radiant heat.
Because it does not have any reflection and repels the effect of radiant heat, it will absorb and accumulate heat energy, and gradually increase the temperature of the surface of the structure and the room. When the heat source disappears, that is, at night, the accumulated thermal energy inside the structure begins to slowly evaporate.
The thermal insulation principle of NASA-grade HeatAX nano-coating thermal insulation coating is different from that of traditional thermal insulation materials. It reflects and rejects 88% of radiant heat, reduces the absorption of thermal energy, and then blocks the conduction and transmission of thermal energy by hollow spheres, making it fast. Emits the surface.
Make other insulation effects better than the following traditional insulation materials:
- 25cm thick glass fiber
- 20cm thick fiber filler
- 14cm thick polystyrene foam
Each group of ventilation balls can only affect the area of about 2 pings, and can only cool 3-4 degrees C, and it must be equipped with a sprinkler system to have this effect, not to mention the problem of water leakage in the ventilation ball! The sprinkler system will allow us to increase water bills; in contrast, NASA-grade HeatAX nano-coatings not only have no water leakage problems, but also do not need to repair the ventilation balls, and do not need to pay for water, the effect is even more amazing, the average temperature difference surface reaches 25 Degree C, indoor cooling temperature 7-10 degrees C.
Of course, we have an exclusive construction team in our factory. We welcome your inquiries. If you need to take a scaffold or a crane, etc., the cost will be extra. If the site conditions are dangerous, construction difficulties and other environmental factors, it will be informed in advance whether to increase the cost.
The three-year performance warranty, three-year product quality warranty and three-year free maintenance warranty are provided.
Insulation effect is based on Taiwan SGS, Intertek, China Central CMA, Singapore Green Building Materials, etc., testing the product for more than 10 years, but may increase or decrease depending on the site environment.
In order to ensure the best effect, it is recommended that you brush with water once every 1-2 years, or make a layer of paint every 3 to 5 years to keep the surface clean and clean, which will ensure the best insulation reflection effect.
The insulation paint product is pure white, which can effectively prevent absorption of light and heat. If you have special needs, you can also customize the color matching according to your needs. Color matching has a partial impact on thermal insulation performance. If you expect optimal thermal performance, it is recommended to use white. And the customization cost will be higher, and there will be a minimum order quantity.